The project is located on National Route 1 Section 3 between Hex River Pass (Km 47.00) and Touws River (Km 74.30) in the Western Cape Province (Total Length = 27.30 km). The site of the project is located within the Breede Valley Local Municipality in the Cape Winelands District Municipality. The project involves upgrading the existing road from km 47.00 to km 74.30 to a 4-lane divided dual carriageway, with a 4-lane dual section between km 47.00 and km 49.00 and a 2-lane single carriageway with climbing lanes from km 49.00 to km 50.00. Located predominantly in a rural setting, with the final section passing through Touwsrivier, the design will use a split-level freeway approach to minimize earthworks. The new southbound carriageway will be constructed alongside the existing road, after which traffic will be shifted to allow reconstruction of the northbound carriageway. The upgraded cross-section includes 10.9 m carriageway width, two 3.7 m lanes, 2.5 m outer and 1 m inner shoulders, and a variable median. Works include widening and reconstructing three river bridges, nine major culverts, and several minor culverts, potential horizontal realignments, opening and re-entry of three borrow pits, stockpiling, vegetation clearance, and limited land acquisition primarily for the southbound carriageway. Existing at-grade intersections will remain unchanged. Services Offered: Scoping and Environmental Impact Assessment, Water Use Licence Application & Environmental Control Officer

The Proposed Development is located north of Mokopane within the Limpopo Province. The extent of the project is located within the Waterberg District Municipality (WDM) and the Mogalekwena Local Municipality (MLM). The N11-13X Mokopane Ring Road is a 21.219 km greenfield project proposing a Class 1A Primary Freeway in a rural area, featuring a four-lane undivided carriageway with 2.5 m shoulders and a 2 m paved median. The development includes the construction and extension of road structures, such as bridges and major culverts, as well as the establishment and expansion of borrow pits. While an Environmental Authorisation (EA) for the road was obtained in 2009 and remains valid, a new EA is required for infilling activities related to sensitive areas and watercourses associated with new bridges and culverts. Key works involve extending one existing culvert, constructing twelve new major culverts, building two new bridges (including one over the Rooisloot River), developing a new 31.7 ha borrow pit, and extending an existing 2.23 ha borrow pit. Services Offered: Basic Assessment, Water Use Licence Application & Environmental Control Officer

The project is located on Higginson Highway (M1) which forms a grade separated interchange with the N2 at km 6.3 at Mobeni Heights, in eThekwini in the Kwa-Zulu Natal Province. The proposed development comprises a comprehensive upgrade of the interchange to improve traffic flow, safety, and long-term infrastructure performance while minimizing disruption. Key interventions include the construction of a new directional flyover (Ramp CA) connecting the N2 southbound to the M1 westbound, three new underpass bridges at Mobeni Heights, and structural rehabilitation of the Higginson Highway Bridge. Drainage improvements involve constructing new culverts, extending and rehabilitating existing culverts, and partially decommissioning one culvert to accommodate new bridge foundations. Retaining walls, including Mechanically Stabilised Earth, soil nail, and reinforced concrete walls, will be installed at strategic locations due to constrained geometry. Overall, the project integrates new bridges, culverts, and retaining structures to enhance connectivity, durability, and safety with minimal impact on the surrounding infrastructure. Services Offered: Basic Assessment, Water Use Licence Application & Environmental Control Officer

The project involves the detailed design and construction monitoring of the upgrade to National Route 3, Section 2, from Hammarsdale (km 8.825) to Cato Ridge (km 20.400). Key works include widening the existing road from three to four lanes with additional climbing lanes where required, reconstructing the pavement, and increasing the road reserve to accommodate the expanded roadway. Safety and structural improvements comprise median barrier walls, outside retaining walls, reconstruction of one bridge, widening of two underpasses, and enlargement of major and minor culverts. Additional works include cut widening for improved sight distance, temporary traffic deviations, opening and operation of a hard-rock quarry for aggregate production, material stockpiling, rehabilitation of the R103 as an alternative route, and provision of streetlighting, all aimed at enhancing traffic flow, safety, and infrastructure durability. Services Offered: Environmental Control Officer

The periodic maintenance of Route 2, Section 30, from Kangela (Km 14.0) to Mduna River (Km 74.3), involves addressing pavement distresses and improving surface performance. Key activities include hydro- cutting areas with severe bleeding, particularly along wheel paths, carrying out isolated repairs such as asphalt patching and crack sealing where needed, and applying a 50 mm sand skeletal layer of continuously graded asphalt using a PG58E- 22 binder to restore road durability and ride quality. Services Covered: Environmental Control Officer

The project is located within Seatides, KwaZulu-Natal and comprises proposed repair and refurbishment of storm damaged school infrastructure and construction of new retaining walls and structures. Services Offered: Geotechnical Investigation & Materials Testing

The project is located near Mandeni, KwaZulu-Natal, and comprises the construction of a sportsfield, guard house, outdoor gymnasium and combi court. Services Covered: Materials Testing (Sabita: MC1a, SANS 3001: NG5, GR30)

The project comprises the construction of a residential dwelling at Portions 236 & 237 (of 102) of the Farm Assagay Kraal No. 853, Assagay, KwaZulu-Natal Services Covered: Geotechnical Investigation & Materials Testing

The project comprises concrete sampling and testing at various construction projects across KwaZulu-Natal, to determine the strength of concrete used for proposed infrastructure. Services Covered: Concrete sampling (SANS 5861-2), Making and curing of Concrete Cubes (SANS 5861-3), Slump Test (SANS 5862-1), and Concrete Cube Tests (SANS 5863)

Aggregate samples comprising G2 , G6 and 20mm crusher sand samples were submitted for testing. Services Covered: Testing of Aggregate Material (SANS 3001: GR1 , GR10, GR12, GR40, GR30, AG4 & AG1)

The project is located on the N11, Section 12 between Mokopane and Marble Hall in Limpopo Province. The development comprises localised strengthening and resurfacing of the road between kilometre 15.45 to kilometre 56.18. Services Covered: Materials Investigation (TMH5: MC1, TMH 6 ST6 DCP, SANS 3001: NG5, BT10 & BT11) and Materials Testing (SANS 3001: GR1, GR10, GR12, GR30, GR40, PR20)

The project is located within the Nongoma Local Municipality area. The development comprises the construction of the Mshiki / Hobiyane to Mponda Roads, from gravel tracks to re-gravelled roads for use by the surrounding communities. Services Offered: Geotechnical Investigation (TMH5: MA2, TMH6 ST6: DCP) & Materials Testing (SANS 3001: GR1, GR10, GR12, GR30, GR40, PR20)

The project involves the construction of 300 low-cost housing units within the Amandawe / KwaCele area. Services Offered: Geotechnical Phase 2 Investigation (in accordance with GFSH-2)